Language

How to design the air outlet of the central air conditioner?

Bringing more green lighting to your urban and rural areas, heading for the brighter future.

The central air conditioner must be installed with a ceiling device at the time of installation, so it will not occupy indoor space. Because the central air conditioner is twice as elegant and fashionable, it is the first choice for many families to use the central air conditioner. The performance of Gree central air-conditioning is good, and it can achieve better indoor temperature adjustment results at the moment of work. Gree central air-conditioning has been favored by generous users since its introduction. In order to make Gree central air-conditioning equipment more elegant, it must be valued. The plan of the air-conditioning outlet.
Gree central air-conditioning plan-affirm the status of the air outlet and return air outlet
When planning the Gree central air-conditioning air outlet, it is necessary to pay attention to the position of the Henan air outlet and the return air outlet. There are usually three methods at the time of planning the Gree central air-conditioning air outlet. The most commonly used method is to take the side out and the next time, that is, let the air out from the front, and then return the air from the bottom. The result of such air volume is better. You can also choose the method of side exit and side return. If the room does not have a ceiling, you can adopt this type of air outlet planning method. Gree's central air-conditioning air outlet can also be planned into the next delivery method, this kind of method is suitable for the room ceiling plan.
Gree central air-conditioning plan-affirm the size of the tuyere
When the Gree central air-conditioning tuyere plan is stopped, it is also necessary to plan the size of the tuyere. The size of the Henan tuyere is indirectly related to the capacity of the indoor unit. If the tuyere plan is too large, the airflow rate will be reduced, which will affect the air conditioner. If the air outlet is too small, the airflow rate will increase, so that when the air conditioner is used, it can easily cause people's body discomfort, and it can also easily cause the air conditioner to produce noise. The length of the tuyere must be determined based on the length of the indoor unit and the actual installation conditions.
Gree central air-conditioning plan-affirm the material of the tuyere
The selection of materials for other air outlets is also extremely tight. Nowadays, Gree central air-conditioning outlets are mainly made of ABS plastic material and aluminum alloy material. The characteristics of different materials of the air outlet are different. The freezing point of the ABS plastic tuyere is relatively high, and it is not easy to freeze and condensate. However, the ABS plastic tuyere is easily deformed during the application process, and it is also relatively easy to turn yellow, and the cost of this type of material is relatively high. The aluminum alloy tuyere is easy to freeze and condensate. Compared with the ABS plastic tuyere, the aluminum alloy tuyere is not easily deformed, and the cost of such materials is also relatively low.
When planning the Gree central air-conditioning air outlet, it is necessary to confirm the relationship between the Henan air outlet and the return air. At the same time, it is necessary to confirm the size of the air-conditioning air outlet. It is also necessary to pay attention to the choice of the material of the air outlet. This can double the air outlet plan of Gree central air-conditioning. Appropriate, so that the application of air-conditioning provides more convenient prerequisites for people's lives.
Related Suggestion : SA-M01 Aluminum Air Vent

any questions?
click here